Personal Protective Equipment (PPE) Safety Quiz

By Vladimir / October 16, 2025

Created on October 16, 2025 By

Vladimir

Personal Protective Equipment (PPE) Safety Quiz

Reference: OSHA 29 CFR 1910.132

PPE is the last line of defense against workplace hazards — but only when properly selected, fitted, and maintained.
This quick quiz helps verify your understanding of OSHA’s PPE requirements and hazard-assessment process.

✅ Reinforce key PPE rules and responsibilities
✅ Recognize and correct common program gaps
✅ Earn a Certificate of Completion with a score of 80% or higher

Use this quiz for refresher training, toolbox talks, or supervisor development — and help strengthen your organization’s PPE program.

For safety or compliance support, contact Vladimir Ivensky, CIH, CSP at e-SafetyPro.com.

1 / 11

Which practices demonstrate an effective PPE program beyond compliance? (Select all that apply)

Field verification that employees properly use and maintain assigned PPE

Integration of PPE inspection into regular job safety analyses and audits

Use of leading indicators (e.g., PPE defect rates, usage observations) to guide improvements

Incorporating employee feedback into PPE selection and comfort evaluation

2 / 11

A crew uses aluminum ladders near energized panels while wearing cotton gloves. What corrective actions are necessary?

Replace ladders with fiberglass and issue voltage-rated gloves and sleeves

Require face shields only

Post warning signs but continue work

Increase observation frequency

3 / 11

Employees report splashes on sleeves despite wearing gloves. The supervisor orders longer gloves but no aprons or sleeves. What is missing?

Task-specific hazard reassessment and additional body protection

Employee discipline

PPE cleaning schedule

Procurement record update

4 / 11

Maintenance workers enter tanks to remove sludge using high-pressure hoses. Vapors and oxygen deficiency may occur. Only gloves and face shields are provided. Which critical compliance gap exists?

Lack of a written permit-required confined-space (PRCS) program and atmospheric monitoring

Incomplete PPE selection for chemical and respiratory hazards

Absence of rescue procedures and attendant assignment

All of the above

5 / 11

A comprehensive PPE hazard assessment should include which of the following elements? (Select all that apply)

Review of physical hazards such as impact, pinch points, or falling objects

Evaluation of chemical and biological exposures, including liquids and vapors

Assessment of environmental factors like heat stress, lighting, and noise

Observation of job tasks, employee feedback, and historical incident data

6 / 11

When selecting chemical-resistant gloves, which factors must be considered? (Select all that apply)

Chemical permeation and degradation data

Dexterity and comfort requirements

Glove thickness, material, and cuff length

Manufacturer’s logo color

7 / 11

Workers remove safety glasses because they fog up in humid conditions. What is the best corrective action?

Provide anti-fog or ventilated eye protection meeting ANSI Z87.1

Enforce discipline only

Substitute face shields without glasses

Allow removal during low-risk tasks

8 / 11

Which statement best represents the hierarchy of controls for managing workplace hazards?

Elimination → Substitution → Engineering → Administrative → PPE

PPE first, then training

Administrative controls replace elimination

Training and signage are sufficient

9 / 11

An employee sweeps a warehouse and requests to wear their own dust mask. The employer determines no hazard exists but allows its use. What is required?

Provide OSHA Appendix D information on voluntary respirator use

Perform fit-testing

Conduct medical evaluation

Establish a written respirator program

10 / 11

During welding fume sampling, exposures approach permissible limits. What should the employer do before issuing PPE?

Evaluate local exhaust ventilation and other engineering controls

Immediately issue respirators to all welders

Post fume warning signs only

Rely on employee discretion

11 / 11

Which steps are required to complete and maintain a compliant PPE hazard assessment? (Select all that apply)

Identify hazards and evaluate feasible engineering or administrative controls

Certify the assessment in writing and make it available to employees

Reassess whenever new processes, hazards, or equipment are introduced

Obtain OSHA approval before implementing PPE

Please provide your name and email address if you would like to receive your quiz results, detailed explanations, and a Certificate of Completion by email.

Your score is

The average score is 34%

you can submit the feedback!

Anonymous feedback

thank you very much for submitting feedback!

Related Posts

Leave a Comment Cancel Reply